
Light fitting installation in Monmouth for pendants, chandeliers, wall lights and bathroom lights. We check the wiring and earthing, fix the fitting securely and test it. Quotes are free.

A standard ceiling rose isn't designed to carry a heavy chandelier. Bigger fittings need fixing to a joist or a strong support between joists. We check the weight of your fitting and the ceiling before deciding how to fix it safely.
Many metal light fittings need an earth connection. Some older lighting circuits were installed without an earth wire, so a metal fitting can't be safely connected to them. We test the circuit first and tell you if anything needs updating.
Lights near a bath or shower must have the right IP rating for the zone they're in, and the circuit should have RCD protection. We check the position against the bathroom zones and choose or approve fittings that are safe for that spot.
Let us know what fittings you've bought or are thinking of buying, and where they're going. Photos of the existing lights help. We check whether the circuits and ceilings are suitable and give you a free quote before booking a date.
On the day, we isolate the lighting circuit, remove the old fittings and check the wiring and earth at each point. We fix the new fittings securely, connect them, fit the bulbs and test the circuit. Packaging is cleared away before we leave.
Ring us or send a few details about the job. We aim to respond the same day, with no call-out charge.
We come and look at the work, then give you a free quote with no obligation to go ahead.
We finish the job, test every circuit we've worked on and leave you with the right certificate.
It depends on how many fittings you're changing, how complex they are and whether any wiring or extra support is needed. Swapping several in one visit costs less per fitting. Send us photos and we'll give you a free quote.
Yes. We check the weight of the chandelier and the ceiling structure, then fix it to a joist or add a support between joists where needed. Very heavy fittings can take two people to lift into place, so let us know the weight when you book.
Common reasons are an old dimmer that isn't compatible with LEDs, a missing neutral in the switch, or a fault in the fitting. Flickering, buzzing or lights glowing when off usually point to the dimmer. We test and find the cause.
Yes, as long as they're designed for use in the UK and suitable for where they're going. We check each fitting before installing it. If one isn't safe for the location, such as a bathroom zone, we'll explain why and suggest an alternative.
We fit new lights in homes and businesses across these areas.
Send us photos of the lights you've chosen and where they're going, and we'll quote for free.